The Summer Garden Show

For the past few years one of the most popular annual events in the club diary is the garden show. In the past two years Gary Pritchard (BKKS judge) has visited the members ponds and judged our koi with some fantastic prizes.

Guest Speakers

During the Monthly Club Nights (second Wednesday of the month) we have a number of guest speakers coming to visit us. Always some of the best attended nights and in 2014 we had Mark Davis, Kevin Ellis, Malcolm Green Lee Burroughs etc.

Club Days Out

The club members are looking to be out and about a lot during 2015. Please see some of the visits to koi shows and koi retailers.

Saturday, 28 April 2012

Talent Spotting Part 1

Koi Mag have been very generous to allow Kangei to present my older articles from the mag, and I am very grateful to Koi Mag for their support.

Please follow this link to learn more about Koi Mag:

And here is the article laid out in jpeg format; click on each page to enlarge the view.

Happy Koi Keeping

Adam Byer

Saturday, 21 April 2012

Automatic For the People

Koi Mag have been very generous to allow Kangei to present my older articles from the mag, and I am very grateful to Koi Mag for their support.

Please follow this link to learn more about Koi Mag:

And here is the article laid out in jpeg format; click on each page to enlarge the view.

Happy Koi Keeping

Adam Byer

Saturday, 14 April 2012

Malcolm Green Visits Kangei Koi Club

Our guest speaker on 11th April was Malcolm Green, owner of Koi Water Garden Ltd in Graet Kimble, Buckinghamshire.

Malcolm delivered a very informative talk about koi and pond treatments that included some explanations of the differences between some traditional treatments and their modern, readily available counterparts. Especially interesting was Malcolm's view that some treatments are not only safe to use at the same time as salt, but are also more effective when used with it - a very useful tip!

Like several of our previous speakers, Malcolm highlighted the importance of knowing the volume of your pond to ensure any pond treatments are admimistered using the correct dose. He also mentioned that, if you don't already know the actual volume of your pond, it is possible to determine it very accurately by using salt and measuring the salinity. Details of how to do this can be found in our member's article "Do you really know the volume of your pond?"

If you would like to know more about Malcom Green or Koi Water Garden Ltd, please visit their website at

Do You Really Know The Volume of Your Pond?


Why Do We Need To Know The Volume Of Our Ponds?

The importance of knowing the accurate volume of your pond is often overlooked. How often do you hear people saying that their pond is “about” 3,000 gallons, 20,000 litres or whatever it might be – but how accurate is “about”?  

A 10ft x 10ft x 4ft 6” deep pond (approx 3m x 3m x 1.5m) pond has a volume of approximately 2,800 gallons – assuming the walls are vertical, the base is flat and we ignore the filters and pipework. A simple 6” (150mm) change in the water level will result in a difference of +/- over 300 gallons (that’s more than 10%). It’s easy to see that, by the time we have benched the bottom of our ponds, added some filters and pipework or built an irregular shaped pond, our estimates can be quite a way out. At best, this will result in under-dosing of our ponds that will mean treatments are ineffective - but is potentially fatal if we overdose our ponds!

By far the easiest way to measure the volume accurately is to use a water meter when we first fill our pond and filter systems. However, if your pond has already been filled and you don’t know the accurate volume, all is not lost – it is possible to determine the volume very accurately, by measuring the salinity of you pond!

The Simple Science of Water Salinity.

It's much easier to explain and measure water salinity using metric figures. If you prefer to know the volume in gallons, it’s still easier to do the measuring in metric and simply convert the final figure to gallons. Just remember that: 
1 tonne of water = 1000 Kg = 1000 Litres = 220 gallons
1 litre of water = weighs 1Kg - or 0.1% of a tonne.

Spookily, 1Kg salt is also equal to 0.1% of a tonne. Therefore, for every 1Kg salt you add to 1 tonne (or 1000 litres) water, you will raise the salinity by 0.1%. Similarly, if you add 10Kg salt to a 10 tonne pond (10,000 litre pond), it will increase the salinity by 0.1%. 
So, for the same 10 tonne pond (assuming the present salinity is 0.0%) to increase the salinity to 0.3% (a good “tonic” level) you will need to add 30Kg salt.

Here's How To Work Out The Volume Of Your Pond By Measuring The Salinity. 

Calculating the volume of your pond (including filters and pipework) using the salinity method is simple - providing you have a salt meter and some accurate scales. All we need to know is:
  • The amount of salt we add (in Kg), and
  • The increase in salinity after we've added the salt.
  1. Measure the salinity of your pond without any salt added and record the figure. (Let's say 0.01%)
  2. Weigh the salt accurately (e.g. 30Kg). Remember to use pure vacuum dried salt (PVD).
  3. Dilute it in a bucket a few Kg at a time and add each bucket to the pond until all the salt has been added - this will prevent any salt burns to your koi.
  4. Allow about 24 hours for the salt to distribute evenly throughout the volume of the pond.
  5. Take a second salinity reading (Let's say its 0.31%)
  6. Subtract the first salinity reading from the second reading (a nice neat 0.3% in this example) - this is the figure you use in the calculation.
  • Divide the amount of salt in Kg by the increased in salinity
i.e. 30 divided by 0.3 = 100
  • Multiply this figure by 100
i.e. 100  x 100 = 10,000

This is the volume of your pond in LITRES.
If you really want to mess about with gallons - just divide it by 1000 (to get tonnes) and then multiply it by 220.
E.g. 10000 / 1000 =  10 tonnes.  10 x 220 = 2,200 gallons in this example.

Some Words of Warning!

Whilst many koi keepers advocate the use of salt for treating koi and aiding recovery, it must be remembered that koi are fresh water fish and should not be kept in salt water for long periods.

It can also be very difficult to remove all the salt from a pond without doing a complete water change. A 50% water change will only remove 50% of the salt. A further 50% water change at a later date will only remove 50% of the salt that remained after the original water change, i.e. 25% of the salt will still be in the pond even after 2 water changes of 50% each time. A further two 50% water changes (meaning you’ve changed the total volume of your pond twice) will still leave 6.25% of the original salt in your pond!It is therefore essential that you accept that several large water changes will be required after using salt in your pond.

Finally, great care should also be taken when treating a previously salted pond with Formalin or any treatments containing Formalin.

Taking The Plunge Part 2 - Adam Byer's Pond Redevelopment

Koi Mag have been very generous to allow Kangei to present my older articles from the mag, and I am very grateful to Koi Mag for their support.

Please follow this link to learn more about Koi Mag:

And here is the article laid out in jpeg format; click on each page to enlarge the view.

Happy Koi Keeping

Adam Byer

Wednesday, 11 April 2012

April Club Night - 11th April - Usual Venue

Tonight we have Malcolm Green coming to give us a talk on medications and treating parasites.

We will start with a brief update on the photo show, and a call from Tim to join his koi development project - which will involve tracking koi from now until the autumn and looking at the results in our September meeting.

I ran a koi development project last year which was great fun and a fantastic learning experience.  You'll see my write up appearing in a few weeks as some of my older koi mag articles get published on our club website. I would encourage all members to consider joining Tim's project.

We're at our usual venue and the meeting will start at 8pm.

See you later.


Saturday, 7 April 2012

Taking The Plunge Part 1 - Adam Byer's Pond Redevelopment

Koi Mag have been very generous to allow Kangei to present my older articles from the mag, and I am very grateful to Koi Mag for their support.

Please follow this link to learn more about Koi Mag:

And here is the article laid out in jpeg format; click on each page to enlarge the view.

Happy Koi Keeping

Adam Byer

Tuesday, 3 April 2012

A Timely Reminder!

A Timely Reminder! by Bob Grinyer
As spring approaches and temperatures increase, it’s worth remembering that any bacteria in our ponds become more active much quicker than our Koi’s immune systems can respond. With this in mind, here’s a reminder of an experience I had a few years ago that might just help to convince you that it is well worth giving our systems a good clean at this time of year.
Fed up with the high maintenance requirements of other filter media I’d tried, I decided to convert the first chamber of my multi-bay filter to use fluidised K1 media.
Removing the original matting and filling the chamber with K1 was easy, but containing the K1 to prevent it escaping when the chamber was flushed or finding its way into the second chamber, or worse still the pump impellor, was much more challenging. Finally, (or so I thought) was the simple task of installing the air supply needed to fluidise the media.
To prevent the K1 being lost when the chamber was flushed I installed a perforated plastic sheet (supported on normal plastic media grids to give it strength).
I used a similar perforated sheet to prevent the K1 flowing over the wier and into the second chamber (and subsequently the pump). However, because of the limited depth of water above chamber divider that creates the weir, the holes were too small to allow sufficient flow and the pump just emptied the second chamber! Undeterred, I replaced this with food grade stainless steel mesh to increase the water flow over the weir. Success! My pride was intact, but my wallet had suffered a severe blow. Food grade stainless steel costs a small fortune - luckily I didn’t need too much of it.
The air supply proved to be much easier than expected. I made a simple “loop” of airline using speedfit pipe and fittings, drilled some 2mm holes along the length of it and just connected it to an air pump using some garden hose. This was fixed to the perforated plastic sheet under the K1 using plastic cable ties.
This photo shows the perforated sheet and airline in position before the K1 was added.

Apart from a slight hiccup when the air lifted the plastic sheeting (easily weighted down with a couple of small sized rockery stones) I now had a filter chamber that utilised a much acclaimed, state-of-the-art filter media and was working well – or was it?
I kept a close eye on things over the next few weeks and months, expecting an increase in Ammonia and/or Nitrite in my pond (i.e. new pond syndrome) until the new filter media matured. Flushing the chamber regularly (for a full 30 seconds at least 3 times a week) and changing about 20% of my water each week (glad I’m not on a meter!) appeared to keep things well under control. My koi looked OK and as happy as you’d expect them to be as water temperatures began to drop with the onset of winter (I’m a great believer in watching my koi to identify any problems rather than relying on scientific tests that make you think all is well.)
Well, winter came and went with no real problems. Spring arrived and the koi began to wake up slowly – but the long awaited summer never really materialised did it? All last summer my water temperature never got higher than 18oC and my koi never looked 100% and didn’t eat as readily as I like them to. I put this down to the low water temperatures not really kick starting my koi’s immune systems and a persistent problem with Nitrite in my pond (nothing too serious, but never down to zero) again caused by the low water temperatures preventing sufficient bacteria in my filters. I just kept to my usual filter maintenance regime of regular flushing and water changes and looked forward to this summer.
As well as watching my koi, I also believe you should practice what you preach. As recommended in the January newsletter, I gave my filters a good spring clean (although I didn’t get round to it until March).  Do you know how enfuriating it is to try to remove 80-90 litres of K1 from a filter chamber and place it in a bowl that will only comfortably hold 60-70 litres before it overflows – especially when it’s blowing a gale? I admit to being tempted to give up the idea of a spring clean, go back inside, make a cup of tea and watch some day time telly (it was only the day time telly that made me stick to the spring clean). As I lifted the perforated plastic sheet, it slipped. One of the rockery stones slid off the edge of it and I had to jump back quickly – the stench was unbearable!
Holding my breath to avoid the smell of rotten eggs, I looked back into the chamber. There, hidden under the perforated grid, was the cause of all my problems. Despite regularly flushing my filters all through the winter, there was a massive build up of detritus in the base of the chamber. I’d been religiously practising what I thought was good pond husbandry. Unfortunately, the 30 second flushing of the chamber was not very effective, so even if I’d done it every day! The build up had become anaerobic and was releasing Hydrogen Sulphide gas into the water. Hydrogen Sulphide (also known as Sewer Gas) is highly toxic and, in an enclosed space such as a sewer pipe, can kill a man in just a few minutes – and my koi had been swimming in it for who knows how long.
Unfortunately, I didn’t have a camera handy at the time and cleaning the chamber properly was my priority, so there are no photos of the really dirty chamber. Suffice to say, I cleaned it thoroughly (including vacuuming the chamber) and there was no sign of dirt anywhere. At least I now had a good idea what the problem was and could think about how to solve it. I reassembled the chamber as it was and started thinking about a solution.
I discussed the problem and my set up with Mark at Cuttlebrook Koi Farm and he suggested removing the perforated sheet and moving the airline right to the bottom of the chamber. The theory is that the moving K1 will keep any dirt suspended in the water and keep it moving through the biological stage of the filter. If the theory works, there’s an added bonus of not needing to flush the chamber in future (no point if nothing settles to be flushed away!
Four rainy days and 10 minutes of day time telly later I was bored enough to do battle with the K1 again. I started by flushing the chamber for 30 seconds again (the second time since the spring clean), removed the K1 and lifted the perforated sheet.

This photo shows the detritus build up in just four days – imagine what was there after a whole winter! You can also see the drain for the filter at the bottom of the photo.

Some more speedfit pipes, fittings,cable clips and sealant were all that was needed to sort the air supply. But if I did need to flush, or hopefully only drain the chamber on rare occasions, I needed to stop the K1 entering the drain. Well, I never thought I’d consider taking bthe washing out of the washing machine as being in the right place at the right time, but it was! There in the drum of the machine, along with all the washing, was a little net bag. Apparently it’s for putting the soap tablet in before you start the washing machine???
But I had a much better use for it.
All that remained was to put the K1 back in, top up the pond and filter and test the theory!
Well, my koi continued to get more active and eat more readily (which they’d done since the initial spring clean). This was no proof that everything was better, but I was certainly happy that the change hadn’t done any harm. Time to just wait, keep watching the koi and be ready to act if anything goes wrong (though I haven’t got a clue what I’d have done if it had!)
A month went by and my koi were still very happy and getting more active. This was a good sign, but I wanted to be there was no more detritus building up where it couldn’t be seen - under the K1. Was the improved koi activity still due to the original spring clean, or was the modification really working? The only way to be sure was………………………………..yep, do battle with the K1 yet again!
I did no maintenance whatsoever of this filter chamber for the whole month and didn’t flush it before removing the K1. I’d also reduced my weekly water changes to between 5% and 10% each week – so you environmentalists can smile again!
These photos are of the same chamber and are taken from almost the same angle, just over a month apart. The water is still in the chamber in both photos (odd bits of K1 can be seen floating in the second photo).


 Does the theory work? Did my water quality improve? Were my koi healthier, more active and eating more? Have I stuck to the same principle with the filters for my new pond?


Bob Grinyer